NOAQ Pressure Guard PG 01



The NOAQ Pressure Guard is an accesory to the NOAQ Tubewall. It makes it possible to connect the tubewall to a compressor or a compressed-air installation. The device includes a pressure reducing valve that maintains the air pressure in the tubewall within the recommended interval, close to 7 kPa (70 mbar or 1 psi). If an air leak should occur the pressure guard will immidiately restore the pressure.
The capacity of the pressure guard depends on that of the compressed-air system. With a sufficient compressed-air supply the maximum flow will be at least 0.8 m3/min. Still it is recommended that the ordinary handheld electrical blower is used for inflating the tubes, as it has a much higher capacity.


Pre-set output pressure 7 kPa   (70 mbar, 1 psi)
Max. supply pressure 1,720 kPa   (17.2 bar, 250 psi)
Flow* 0.8 m³/min  
Supply side coupling** Plug-in nipple Rectus ser.25 SFIW 21  
Tubewall side coupling Monsun XG Ø 70mm  
Total weight 1.4 kg  
Length of hose 2.5 m  

* at a supply pressure of 900 kPa

** Other coupling standards on demand.

   A NOAQ Pressure Guard PG 00 (without nipple) is also available


pdf iconNOAQ Pressure Guard - Fact sheet