Excavator 3D
Topcon brings the future of machine control to you today with the affordable X-53 3D system for excavators.
Features & Benefits:
- Multiple views (plan, profile, section) display real time position of the Bucket, Stick, Boom and entire machine.
- Easy to use color Cut/Fill Indicator for instant grade verification.
- Elevation reference lets you control grade on the left, right, or middle of your bucket.
- Change buckets on the fly.
TS-1 Tilt Sensor
- Environmentally sealed
- No moving parts
- 3-axis, 360° sensor
- CAN port interface
- 0.01 degree resolution
GX-60 Control Box
- High-resolution, bright, color, touch screen display.
- Bluetooth, Ethernet, and USB communication.
- Adjustable side or rear mounting options.
- Quick-disconnect connectors.
- Internal back-up battery pack
MC-R3 GNSS Receiver
- G3 Tracking technology
- Network capable receiver with GSM / CDMA
- UHF & Spread Spectrum radio options
- LED status indicators
- Advance Multipath Reduction (AMR)
Topcon’s X-53 3D Excavator provides the operator with all the information needed to expedite excavation tasks. Unlike laser excavator systems, X53 enables the operator to “see” his machine’s exact position in relation to the site, enabling precise positioning over utility centerlines. In real time the operator can also see the position of the teeth of the bucket compared to the finish design which is very helpful in deep cuts, blind excavations or when working around structures.
Multiple Views
The X-53 3D Excavator offers the operator several view options. Plan View, Profile View and Section View to mention a few. With this versatility built in the 3DMC software the operator can use multiple views to accomplish the simplest tasks all the way through the most complex excavating tasks.
Cut / Fill Indicator
3D-MC offers a simple to use, easy to see grade indicator that represents the position of the bucket teeth in reference to the design surface at all times. By utilizing GPS the operator knows not only where they are at on the job site at all times, but also gives them elevation reference at all areas of the job site.
Elevation Reference
Another feature of using the X-53 3D Excavator is the option to reference the bucket in multiple spots. reference the left, right or center of the bucket to build complex slopes and ditched with ease. A versatile one touch, touchscreen option in 3DMC through the GX-55 control box.
No Linearization Required
The TS-1 tilt sensors are rugged, shockproof and water proof sensors that do not require a lengthy linearization process on a day to day basis. Once the X-53 is calibrated its as simple as turning the system on each day and start working. Simplicity at it’s finest!
Change Buckets on the Fly
3D-MC on the X-53 3D Excavator allows the operator to build and store multiple bucket configurations. This feature allows the operator to switch between multiple buckets but simply selecting the proper bucket from the list. With no downtime switching buckets and needing to re-reference the components, the productivity of the excavator will soar!
Features & Benefits
- Easy to use, flexible 3D control
- Fine grade in highest gear
- Advanced user interface
- Multiple jobsite views
- mm level accuracy
- Inertial movement sensor